Fit polyclonal model to escape in an assay (eg, antibody selection)¶
In the notebook below, "antibody" is used as a synonym for any agent that will neutralize the viral infectivity. However, the plotting is done somewhat differently depending on the assay.
Import Python modules.
In [1]:
import pickle
import altair as alt
import polyclonal
import pandas as pd
This notebook is parameterized by papermill.
The next cell is tagged as parameters to get the passed parameters.
In [2]:
# this cell is tagged parameters for `papermill` parameterization
assay = None
selection = None
params = None
neut_standard_frac_csvs = None
prob_escape_csvs = None
assay_config = None
prob_escape_mean_csv = None
site_numbering_map_csv = None
pickle_file = None
In [3]:
# Parameters
params = {
"neut_standard_name": "neut_standard",
"prob_escape_filters": {
"min_neut_standard_count": 1000,
"min_neut_standard_frac": 0.0001,
"min_no_antibody_count": 20,
"min_no_antibody_frac": "1e-06",
"min_antibody_count": 300,
"min_antibody_frac": 0.0001,
"max_aa_subs": 3,
"clip_uncensored_prob_escape": 5,
},
"polyclonal_params": {
"n_epitopes": 1,
"spatial_distances": None,
"fit_kwargs": {
"reg_escape_weight": 0.1,
"reg_spread_weight": 0.1,
"reg_activity_weight": 1.0,
"logfreq": 200,
},
},
"escape_plot_kwargs": {
"alphabet": [
"R",
"K",
"H",
"D",
"E",
"Q",
"N",
"S",
"T",
"Y",
"W",
"F",
"A",
"I",
"L",
"M",
"V",
"G",
"P",
"C",
],
"addtl_slider_stats": {"times_seen": 2},
"addtl_tooltip_stats": ["sequential_site"],
"heatmap_max_at_least": 1,
"heatmap_min_at_least": -1,
"init_floor_at_zero": False,
"init_site_statistic": "mean",
"site_zoom_bar_color_col": "region",
"heatmap_color_scheme": "redblue",
},
"plot_hide_stats": {
"functional effect": {
"csv": "results/func_effects/averages/CHO_bEFNB3_func_effects.csv",
"csv_col": "effect",
"init": -2,
"min_filters": {"times_seen": 2},
}
},
"no_antibody_sample": "LibB-230720-CHO-C6-nac",
"antibody_samples": {
"LibB-230720-CHO-C6-m102-0.3": {"concentration": 0.3, "use_in_fit": True},
"LibB-230720-CHO-C6-m102-0.8": {"concentration": 0.8, "use_in_fit": True},
"LibB-230720-CHO-C6-m102-1.2": {"concentration": 1.2, "use_in_fit": True},
},
}
neut_standard_frac_csvs = [
"results/antibody_escape/by_selection/LibB-230720-m102.4/LibB-230720-CHO-C6-m102-0.3_neut_standard_fracs.csv",
"results/antibody_escape/by_selection/LibB-230720-m102.4/LibB-230720-CHO-C6-m102-0.8_neut_standard_fracs.csv",
"results/antibody_escape/by_selection/LibB-230720-m102.4/LibB-230720-CHO-C6-m102-1.2_neut_standard_fracs.csv",
]
prob_escape_csvs = [
"results/antibody_escape/by_selection/LibB-230720-m102.4/LibB-230720-CHO-C6-m102-0.3_prob_escape.csv",
"results/antibody_escape/by_selection/LibB-230720-m102.4/LibB-230720-CHO-C6-m102-0.8_prob_escape.csv",
"results/antibody_escape/by_selection/LibB-230720-m102.4/LibB-230720-CHO-C6-m102-1.2_prob_escape.csv",
]
assay_config = {
"title": "Antibody/serum escape",
"selections": "antibody_selections",
"averages": "avg_antibody_escape",
"prob_escape_scale": {"type": "symlog", "constant": 0.04},
"scale_stat": 1,
"stat_name": "escape",
}
site_numbering_map_csv = "data/site_numbering_map.csv"
prob_escape_mean_csv = (
"results/antibody_escape/by_selection/LibB-230720-m102.4_prob_escape_mean.csv"
)
pickle_file = (
"results/antibody_escape/by_selection/LibB-230720-m102.4_polyclonal_model.pickle"
)
assay = "antibody_escape"
selection = "LibB-230720-m102.4"
Read and process data¶
In [4]:
print(f"Analyzing data for {assay=}")
Analyzing data for assay='antibody_escape'
Convert the antibody samples into a data frame:
In [5]:
antibody_samples = pd.DataFrame.from_dict(
params["antibody_samples"], orient="index"
).reset_index(names="sample")
Get other parameters:
In [6]:
prob_escape_filters = {k: float(v) for k, v in params["prob_escape_filters"].items()}
Read the neut standard fracs:
In [7]:
neut_standard_fracs = pd.concat(
[
pd.read_csv(f).assign(sample=sample)
for sample, f in zip(antibody_samples["sample"], neut_standard_frac_csvs)
],
ignore_index=True,
).merge(antibody_samples, validate="one_to_one", on="sample")
Read the probabilities (fraction) escape for each variant:
In [8]:
prob_escape = pd.concat(
[
pd.read_csv(f, keep_default_na=False, na_values="nan").assign(sample=sample)
for sample, f in zip(antibody_samples["sample"], prob_escape_csvs)
],
ignore_index=True,
).merge(antibody_samples, validate="many_to_one", on="sample")
Plot the neutralization standard fractions¶
Plot the neutralization standard fractions for each sample:
In [9]:
neut_standard_fracs_chart = (
alt.Chart(
neut_standard_fracs.rename(
columns={"antibody_frac": "antibody", "no-antibody_frac": "no-antibody"}
).melt(
id_vars=["sample", "use_in_fit", "concentration"],
value_vars=["antibody", "no-antibody"],
var_name="sample type",
value_name="neutralization standard fraction",
)
)
.encode(
x=alt.X(
"neutralization standard fraction",
scale=alt.Scale(type="symlog", constant=0.04, domainMax=1),
),
y=alt.Y("sample", sort=alt.SortField("concentration"), title=None),
shape=alt.Shape("sample type", title="sample type (filled if used in fit)"),
stroke=alt.Color(
"sample type", scale=alt.Scale(range=["#1F77B4FF", "#FF7F0EFF"])
),
color=alt.Color(
"sample type", scale=alt.Scale(range=["#1F77B4FF", "#FF7F0EFF"])
),
fillOpacity=alt.Opacity(
"use_in_fit",
scale=alt.Scale(domain=[True, False], range=[1, 0]),
),
tooltip=[
"sample",
alt.Tooltip("concentration", format=".3g"),
alt.Tooltip("neutralization standard fraction", format=".3g"),
],
)
.mark_point(filled=True, size=50)
.configure_axis(labelLimit=500)
.properties(title=f"Neutralization standard fractions for {selection}")
)
neut_standard_fracs_chart
Out[9]:
Make sure all samples used in the fit have enough neutralization standard counts and fraction:
In [10]:
for prop in ["count", "frac"]:
minval = float(prob_escape_filters[f"min_neut_standard_{prop}"])
minval = float(minval)
if all(
(neut_standard_fracs.query("use_in_fit")[f"{stype}_{prop}"] >= minval).all()
for stype in ["antibody", "no-antibody"]
):
print(f"Adequate neut_standard_{prop} of >= {minval}")
else:
raise ValueError(
f"Inadequate neut_standard_{prop} < {minval}\n{neut_standard_fracs}"
)
Adequate neut_standard_count of >= 1000.0 Adequate neut_standard_frac of >= 0.0001
Get variants with adequate counts to retain¶
First get the minimum counts variants need to be retained: they need to meet this count threshold for either the antibody or no-antibody sample:
In [11]:
# get minimum counts to be retained: needs to meet these for one of the samples
min_counts = (
prob_escape.groupby("sample", as_index=False)
.aggregate({"antibody_count": "sum", "no-antibody_count": "sum"})
.assign(
min_antibody_count=lambda x: (
(prob_escape_filters["min_antibody_frac"] * x["antibody_count"]).clip(
lower=prob_escape_filters["min_antibody_count"],
)
),
min_no_antibody_count=lambda x: (
(prob_escape_filters["min_no_antibody_frac"] * x["no-antibody_count"]).clip(
lower=prob_escape_filters["min_no_antibody_count"],
)
),
)[["sample", "min_antibody_count", "min_no_antibody_count"]]
)
display(min_counts)
| sample | min_antibody_count | min_no_antibody_count | |
|---|---|---|---|
| 0 | LibB-230720-CHO-C6-m102-0.3 | 2027.6525 | 23.821819 |
| 1 | LibB-230720-CHO-C6-m102-0.8 | 2034.9415 | 23.821819 |
| 2 | LibB-230720-CHO-C6-m102-1.2 | 1413.8983 | 23.821819 |
Now plot the distribution of no-antibody and antibody counts versus the thresholds. Recall we keep variants that meet either threshold, and in an ideal experiment all variants would meet the no-antibody threshold but we may expect only a small fraction (true escape mutations) to meet the antibody threshold.
In the plots below, the bars span the interquartile range, the lines go from min to max, the dark black line is the median, and the red line is the threshold for counts to be retained (a variant only needs to meet one threshold).
In [12]:
count_summary = (
prob_escape.melt(
id_vars=["sample", "concentration", "use_in_fit"],
value_vars=["antibody_count", "no-antibody_count"],
var_name="count_type",
value_name="count",
)
.groupby(["sample", "concentration", "use_in_fit", "count_type"], as_index=False)
.aggregate(
median=pd.NamedAgg("count", "median"),
q1=pd.NamedAgg("count", lambda s: s.quantile(0.25)),
q3=pd.NamedAgg("count", lambda s: s.quantile(0.75)),
min=pd.NamedAgg("count", "min"),
max=pd.NamedAgg("count", "max"),
)
.merge(
min_counts.rename(
columns={
"min_antibody_count": "antibody_count",
"min_no_antibody_count": "no-antibody_count",
}
).melt(id_vars="sample", var_name="count_type", value_name="threshold"),
on=["sample", "count_type"],
validate="one_to_one",
)
)
base_chart = alt.Chart(count_summary).encode(
y=alt.Y("sample", title=None, sort=alt.SortField("concentration")),
tooltip=count_summary.columns.tolist(),
color=alt.Color(
"use_in_fit",
scale=alt.Scale(domain=[True, False], range=["blue", "gray"]),
),
)
quantile_bar = base_chart.encode(
x=alt.X(
"q1",
scale=alt.Scale(type="symlog", constant=20),
axis=alt.Axis(labelOverlap=True),
title="count",
),
x2="q3",
).mark_bar(color="blue", height={"band": 0.8})
range_line = base_chart.encode(x="min", x2="max").mark_rule(color="blue", opacity=0.5)
median_line = base_chart.encode(
x="median", x2="median", color=alt.value("black")
).mark_bar(xOffset=1, x2Offset=-1, height={"band": 0.8})
threshold_line = base_chart.encode(
x="threshold", x2="threshold", color=alt.value("red")
).mark_bar(xOffset=1, x2Offset=-1, height={"band": 0.8})
count_summary_chart = (quantile_bar + range_line + median_line + threshold_line).facet(
column=alt.Column(
"count_type",
title=None,
sort="descending",
header=alt.Header(labelFontWeight="bold", labelFontSize=12),
),
)
count_summary_chart
Out[12]:
Classify which variants to retain:
In [13]:
prob_escape = (
prob_escape.drop(
columns=["min_no_antibody_count", "min_antibody_count"],
errors="ignore",
)
.merge(min_counts, on="sample", validate="many_to_one")
.assign(
retain=lambda x: (
(x["antibody_count"] >= x["min_antibody_count"])
| (x["no-antibody_count"] >= x["min_no_antibody_count"])
)
)
)
Plot the fraction of all barcode counts and the fraction of all variants that are retained. We typically retain a higher fraction of barcode counts than variants, since the barcode counts are asymmetrically distributed toward some variants, which are more likely to be retained.
In [14]:
frac_retained = (
prob_escape.melt(
id_vars=["sample", "concentration", "use_in_fit", "retain", "barcode"],
value_vars=["antibody_count", "no-antibody_count"],
var_name="count_type",
value_name="count",
)
.assign(retained_count=lambda x: x["count"] * x["retain"].astype(int))
.groupby(["sample", "concentration", "use_in_fit", "count_type"], as_index=False)
.aggregate(
counts=pd.NamedAgg("count", "sum"),
retained_counts=pd.NamedAgg("retained_count", "sum"),
variants=pd.NamedAgg("barcode", "count"),
retained_variants=pd.NamedAgg("retain", "sum"),
)
.assign(
barcode_counts=lambda x: x["retained_counts"] / x["counts"],
variants=lambda x: x["retained_variants"] / x["variants"],
)
.melt(
id_vars=["sample", "concentration", "use_in_fit", "count_type"],
value_vars=["variants", "barcode_counts"],
var_name="frac_type",
value_name="fraction_retained",
)
)
frac_retained_chart = (
alt.Chart(frac_retained)
.encode(
y=alt.Y("sample", title=None, sort=alt.SortField("concentration")),
x=alt.X("fraction_retained", scale=alt.Scale(domain=[0, 1])),
yOffset="count_type",
color="count_type",
opacity=alt.Opacity(
"use_in_fit",
scale=alt.Scale(domain=[True, False], range=[1, 0.4]),
),
column=alt.Column(
"frac_type",
title=None,
header=alt.Header(labelFontWeight="bold", labelFontSize=12),
),
tooltip=[
alt.Tooltip(c, format=".3f") if c == "fraction_retained" else c
for c in frac_retained.columns
],
)
.mark_bar()
.properties(height=alt.Step(12), width=250)
)
frac_retained_chart
Out[14]:
Probability (fraction) escape among retained variants¶
We now just analyze retained variants:
In [15]:
display(
prob_escape.query("retain")
.groupby(["sample", "concentration"])
.aggregate(n_variants=pd.NamedAgg("barcode", "nunique"))
)
| n_variants | ||
|---|---|---|
| sample | concentration | |
| LibB-230720-CHO-C6-m102-0.3 | 0.3 | 48420 |
| LibB-230720-CHO-C6-m102-0.8 | 0.8 | 48423 |
| LibB-230720-CHO-C6-m102-1.2 | 1.2 | 48429 |
Get mean probability of escape across all variants with the indicated number of mutations. Note we weight each retained variant equally regardless of how many barcode counts it has. We plot means for both the censored (set to between 0 and 1)and uncensored prob escape. Note that the plot uses a symlog scale for the y-axis. Mouseover points for details.
In [16]:
max_aa_subs = prob_escape_filters["max_aa_subs"]
mean_prob_escape = (
prob_escape.query("retain")
.assign(
n_substitutions=lambda x: (
x["aa_substitutions"]
.str.split()
.map(len)
.clip(upper=max_aa_subs)
.map(lambda n: str(n) if n < max_aa_subs else f">{int(max_aa_subs - 1)}")
),
prob_escape_uncensored=lambda x: x["prob_escape_uncensored"].clip(
upper=prob_escape_filters["clip_uncensored_prob_escape"],
),
)
.groupby(
["sample", "concentration", "use_in_fit", "n_substitutions"], as_index=False
)
.aggregate(
prob_escape=pd.NamedAgg("prob_escape", "mean"),
prob_escape_uncensored=pd.NamedAgg("prob_escape_uncensored", "mean"),
n_variants=pd.NamedAgg("barcode", "count"),
)
.rename(
columns={
"prob_escape": "censored to [0, 1]",
"prob_escape_uncensored": "not censored",
}
)
.melt(
id_vars=[
"sample",
"concentration",
"use_in_fit",
"n_substitutions",
"n_variants",
],
var_name="censored",
value_name="probability escape",
)
)
print(f"Writing mean prob escape for samples used in fit to {prob_escape_mean_csv}")
mean_prob_escape.to_csv(prob_escape_mean_csv, index=False, float_format="%.4g")
mean_prob_escape_chart = (
alt.Chart(mean_prob_escape)
.encode(
x=alt.X(
"concentration",
**(
{"title": assay_config["concentration_title"]}
if "concentration_title" in assay_config
else {}
),
scale=alt.Scale(
**(
assay_config["concentration_scale"]
if "concentration_scale" in assay_config
else {"type": "log"}
)
),
),
y=alt.Y(
"probability escape",
scale=alt.Scale(**assay_config["prob_escape_scale"]),
),
column=alt.Column(
"censored",
title=None,
header=alt.Header(labelFontWeight="bold", labelFontSize=12),
),
color=alt.Color("n_substitutions"),
tooltip=[
alt.Tooltip(c, format=".3g") if c == "probability escape" else c
for c in mean_prob_escape.columns
],
shape=alt.Shape("use_in_fit", scale=alt.Scale(domain=[True, False])),
)
.mark_line(point=True, size=0.75, opacity=0.8)
.properties(width=220, height=140)
.configure_axis(grid=False)
.configure_point(size=50)
)
mean_prob_escape_chart
Writing mean prob escape for samples used in fit to results/antibody_escape/by_selection/LibB-230720-m102.4_prob_escape_mean.csv
Out[16]:
Fit polyclonal model¶
Fit the model. If there is more than one epitope, we fit models with fewer epitopes too:
In [17]:
# first build up arguments used to specify fitting
n_epitopes = params["polyclonal_params"]["n_epitopes"]
spatial_distances = params["polyclonal_params"]["spatial_distances"]
fit_kwargs = params["polyclonal_params"]["fit_kwargs"]
escape_plot_kwargs = params["escape_plot_kwargs"]
plot_hide_stats = params["plot_hide_stats"]
site_numbering_map = pd.read_csv(site_numbering_map_csv).sort_values("sequential_site")
assert site_numbering_map[["sequential_site", "reference_site"]].notnull().all().all()
if "addtl_slider_stats" not in escape_plot_kwargs:
escape_plot_kwargs["addtl_slider_stats"] = {}
if "addtl_slider_stats_hide_not_filter" not in escape_plot_kwargs:
escape_plot_kwargs["addtl_slider_stats_hide_not_filter"] = []
escape_plot_kwargs["df_to_merge"] = []
for stat, stat_d in plot_hide_stats.items():
escape_plot_kwargs["addtl_slider_stats"][stat] = stat_d["init"]
escape_plot_kwargs["addtl_slider_stats_hide_not_filter"].append(stat)
merge_df = pd.read_csv(stat_d["csv"]).rename(columns={stat_d["csv_col"]: stat})
if "min_filters" in stat_d:
for col, col_min in stat_d["min_filters"].items():
if col not in merge_df.columns:
raise ValueError(f"{stat=} CSV lacks {col=}\n{merge_df.columns=}")
merge_df = merge_df[merge_df[col] >= col_min]
escape_plot_kwargs["df_to_merge"].append(merge_df[["site", "mutant", stat]])
addtl_site_cols = [
c
for c in site_numbering_map.columns
if c.endswith("site") and c != "reference_site"
]
escape_plot_kwargs["df_to_merge"].append(
site_numbering_map.rename(columns={"reference_site": "site"})[
["site", *addtl_site_cols, "region"]
]
)
if "addtl_tooltip_stats" not in escape_plot_kwargs:
escape_plot_kwargs["addtl_tooltip_stats"] = []
for c in addtl_site_cols:
if c not in escape_plot_kwargs["addtl_tooltip_stats"]:
escape_plot_kwargs["addtl_tooltip_stats"].append(c)
escape_plot_kwargs["scale_stat_col"] = assay_config["scale_stat"]
if assay_config["stat_name"] != "escape":
escape_plot_kwargs["rename_stat_col"] = assay_config["stat_name"]
if spatial_distances is not None:
print(f"Reading spatial distances from {spatial_distances}")
spatial_distances = pd.read_csv(spatial_distances)
print(f"Read spatial distances for {len(spatial_distances)} residue pairs")
# now fit the models
for n in range(1, n_epitopes + 1):
print(f"\n\nFitting a model for {n} epitopes")
model = polyclonal.Polyclonal(
n_epitopes=n,
data_to_fit=(
prob_escape.query("retain").query("use_in_fit")[
["aa_substitutions", "concentration", "prob_escape"]
]
),
alphabet=polyclonal.AAS_WITHSTOP_WITHGAP,
spatial_distances=spatial_distances,
sites=site_numbering_map["reference_site"],
)
opt_res = model.fit(**fit_kwargs)
print("Here is the neutralization curve:")
display(model.curves_plot())
print("Here is the mutation-effect plot:")
display(model.mut_escape_plot(**escape_plot_kwargs))
print(f"\n\nWriting the {n} epitope model to {pickle_file}")
with open(pickle_file, "wb") as f:
pickle.dump(model, f)
Fitting a model for 1 epitopes
#
# Fitting site-level fixed Hill coefficient and non-neutralized frac model.
# Starting optimization of 534 parameters at Fri Mar 29 08:04:50 2024.
step time_sec loss fit_loss reg_escape reg_spread reg_spatial reg_uniqueness reg_uniqueness2 reg_activity reg_hill_coefficient reg_non_neutralized_frac
0 0.029527 26019 26014 0 0 0 0 0 4.936 0 0
35 1.0849 4851.7 4826.9 6.5306 0 0 0 0 18.213 0 0
# Successfully finished at Fri Mar 29 08:04:51 2024.
#
# Fitting fixed Hill coefficient and non-neutralized frac model.
# Starting optimization of 9891 parameters at Fri Mar 29 08:04:51 2024.
step time_sec loss fit_loss reg_escape reg_spread reg_spatial reg_uniqueness reg_uniqueness2 reg_activity reg_hill_coefficient reg_non_neutralized_frac
0 0.06153 7034.5 6894.3 121.98 4.0558e-32 0 0 0 18.213 0 0
133 7.8257 6350 6166.9 157.18 5.1456 0 0 0 20.791 0 0
# Successfully finished at Fri Mar 29 08:04:59 2024.
#
# Fitting model.
# Starting optimization of 9893 parameters at Fri Mar 29 08:04:59 2024.
step time_sec loss fit_loss reg_escape reg_spread reg_spatial reg_uniqueness reg_uniqueness2 reg_activity reg_hill_coefficient reg_non_neutralized_frac
0 0.050434 6331.3 6166.9 157.18 5.1456 0 0 0 2.0791 0 0
200 10.736 3041 2812.1 103.37 3.1972 0 0 0 0.98679 121.35 0
400 21.399 3018 2788.7 96.049 2.8167 0 0 0 0.98476 129.39 0
600 31.931 3014 2787.6 93.067 2.6011 0 0 0 0.98496 129.73 0
680 36.002 3013.4 2785.3 92.337 2.5333 0 0 0 0.98319 132.21 0
# Successfully finished at Fri Mar 29 08:05:35 2024.
Here is the neutralization curve:
Here is the mutation-effect plot:
Writing the 1 epitope model to results/antibody_escape/by_selection/LibB-230720-m102.4_polyclonal_model.pickle
In [ ]: